PRODUCT CENTER
Hastelloy B N10001 Nickel alloy steel plate
Hastelloy B N10001 Nickel alloy steel plate sheet
Haosteel is professional manufacturer& and supplier of Hastelloy B N10001 Nickel alloy steel plate. Quality guaranteed, On-tim'e delivery, After-sales warranty.
Hastelloy B alloy steel plate sheet
N10001 Nickel alloy steel plate sheet
Description:
Hastelloy is a nickel-based corrosion-resistant alloy, which is mainly divided i♦nto nickel-chromium alloy and nickel-chromium-molybdenum alloy. Hastelloy has good co₩rrosion resistance and thermal stability, and is used in avi ation and chemical fields. Hastelloy is the general name for the commercial grades of nickel-based corrosion↕-resistant alloys produced by Hastelloy International.
Hastelloy B Hastelloy Overview: Hastelloy B alloy is a nickel-molybde♠num corrosion-resistant alloy, its main feature is resistance ↕to boiling HCl corrosion, the alloy has good corrosion resistance under♥ atmospheric conditions. Nickel-molybdenum alloy has very low carbon and silβicon content. It reduces the precipitation of carbon and other impur•ity phases in the heat affected zone of the weld, λso the weld seam also has sufficient corrosion resistance. It has good corrosion resistance in reducing media, such as HCl solutions of various temperatπures and concentrations. It also has good corrosion resistance in medium concentrations o>f H2SO4 solution (or containing chloride ions). It can also be used in CH3COOH and H3PO4 environments. Alloy materials have good corrosion resi♦stance only in the proper metallographic state and pure crystal structure. Hastelloy B Ha stelloy is a nickel-based superalloy consisting of nickel, molybdenum, δcobalt and other elements with a nickel content of approximately δ62%. Hastelloy B Hastelloy has a wide range of applications↓ in the chemical, petrochemical, energy manufacturing and pollution control industries, especi&ally in the sulfuric acid, hydrochloric acid, phosphoric acδid, acetic acid and other industries.
Hastelloy is a nickel-based corrosion-resistant alloy↓, which is mainly divided into nickel-chromium alloy and nick↓el-chromium-molybdenum alloy. Hastelloy has good corrosi£on resistance and thermal stability, and is used in aviation and chemical fields. H™astelloy is the general name for the commercial grades of nickel-based ∏corrosion-resistant alloys produced by Hastelloy Internation$al.
Corrosion resistance of Hastelloy B Hastelloy:
Hastelloy B Hastelloy has a very low carbon and silicon content, which reduces the precipitation of carbon and other impurity phase₹s in the heat affected zone of the weld. Therefore, the weld is also su fficiently corrosion resistant. Hastelloy B-2 alloy has excellent corr¶osion resistance in reducing media, such as hydrochl oric acid solutions of various temperatures and concentrations. It also has good co↓rrosion resistance in medium concentration sulfuric acid solution (or contains a certain ≥amount of chloride ions). It can also be used in acetic acid and phosphoric acid environments. Alloy materials have the best corrosion ∏resistance only in the proper metallographic state and pure crystal structure.
Hastelloy B Hastelloy grades and standards:
Material grade: Hastelloy B Hastelloy US UNS brand: N10001
Complete specifications, stock in stock
Strip, sheet (thick plate, medium plate, sheet, steel plate), bar (black bar,₩ light bar, grinding bar, round bar, square bar, steel bar), pipe (capillary, s★eamless pipe, steel pipe), Forgings (flanges, elbows, bolts, nuts, tees),Ω welding consumables (welding rods, welding wire, welded pipes), wi↑re and other materials.
Chemical Composition Of Hastelloy B
|
Alloy |
% |
Ni |
Mo |
Fe |
Cr |
Co |
C |
Mn |
V |
Si |
P |
S |
|
Hastelloy B |
Min |
Re |
26 |
4.0 |
|
|
|
|
0.2 |
|
|
|
|
|
Max |
|
30 |
6.0 |
1.0 |
2.5 |
0.05 |
1.0 |
0.4 |
1.0 |
0.04 |
0.03 |
Hastelloy B Hastelloy physical properties: density: 9.24g/cm3, melting point: 1330-1380 °C.
Hastelloy B Hastelloy Mechanical Properties:
1. Hastelloy B Hastelloy tensile strength Rm N/mm2 ≥ 690.
2. Hastelloy B Hastelloy yield strength: RP0.2N/mm2 ≥ 310.
3. Hastelloy B Hastelloy elongation: A5 % ≥ 40.
Hastelloy B Hastelloy has the following properties:
1. Control iron and chromium at the lowest level to prevent the format™ion of β-phase Ni4Mo.
2. Excellent corrosion resistance to the reducing environment.
3, excellent resistance to moderate concentrations of sulfuric acid and many non-oxidizing acids.
4, very good resistance to chloride ion reduction stress corrosion cracking (SCCλ).
5, excellent resistance to a variety of organic acid corrosio≥n.
Metallographic structure of Hastelloy B Hastelloy:
Hastelloy B Hastelloy is a face-centered cubic lattice structure. By controlling the iron an d chromium content to a minimum, processing and brittleness are reduced, preventing prαecipitation of Ni4Mo phase between 700 and 870 °C.
Corrosion resistance of Hastelloy B Hastelloy:
Hastelloy B Hastelloy has a very low carbon and silicon content, which reduces the preci&pitation of carbon and other impurity phases in the heat affected zone of the weld. Therefore, the ₩weld is also sufficiently corrosion resistant. Haste÷lloy B-2 alloy has excellent corrosion resistance in reducinπg media, such as hydrochloric acid solutions of various temperatures and co™ncentrations. It also has good corrosion resistance in medium cβoncentration sulfuric acid solution (or contains a certain± amount of chloride ions). It can also be used in acetic acid and phosphoric acid environments. Alloy materials have the best corrosion resistance only in© the proper metallographic state and pure crystal structure.
Product Details:
|
Product Name |
Good strength Hastelloy B N10001 alloy steel |
|
Material |
Monel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy |
|
Shape |
Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet₩ |
|
Grade |
Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904€L |
|
Others: 253Ma,254SMo,654SMo,F50(UNS S32100)F60,F61,F65,1J22,N4,N6 etc |
|
|
Alloy : Alloy 20/28/31;Nickel 200，Nickel 201 |
|
|
Hastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g; |
|
|
Hastelloy B / UNS N10001,Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.461δ7,Hastelloy C,Hastelloy C-4 /UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNS N06022 / DIπN W. Nr. 2.4602,Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.481∑9,Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665 |
|
|
Haynes: Haynes 230/556/188; |
|
|
Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20; |
|
|
Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06 601 / DIN W. Nr. 2.4851,Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07725,Inconel X-750 / UNS N07750 / DIN W. Nr≈. 2.4669,Inconel 600 / UNS N06600 / DIN W. Nr. 2.4816 |
|
|
Incoloy: Incoloy 330/800/800H/800HT/825/901/925/926; |
|
|
GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044 |
|
|
Monel: Monel 400/K500/R405 |
|
|
Nitronic: Nitronic 40/50/60; |
|
|
Nimonic: Nimonic 75/80/80A/90/93/A263 ; |
|
|
Specification |
Wire: 0.01-10mm |
|
Product |
1.According to the preparation process can be divided into deformation superalλloys, |
|
Standard |
GB,AISI,ASTM,DIN,EN,SUS,UNS etc |
|
Inspection |
ISO,SGS,BV and so on. |
|
Packaging |
1. cases packed in wooden cases |
Hastelloy B2 (N10665, 2.4617) Hastelloy application range:
Hastelloy B-2 has a wide range of applications in the chemical, petrochemical, energy manufactβuring and pollution control industries, especially in the sulfuric acid, hydrochloric 'acid, phosphoric acid, acetic acid and other industries. If• it is used in a special field, please consult the material supplier.
Hastelloy B2 (N10665, 2.4617) Hastelloy processing and hea™t treatment:
1. Hastelloy B2 (N10665, 2.4617) Hastelloy heating:
(1) It is very important to keep the workpiece clean and free of contamination before and dur∞ing heat treatment.
(2), can not contact sulfur, phosphorus, lead and other low δmelting point metals during heating, otherwise it will damage the performance of the alloy and m↔ake Hastelloy B-2 brittle. Care should be taken to remove stains su★ch as marking paints, temperature indicating paints, colored& crayons, chalk, lubricating oils, various liquids and oils, fσuels, etc.
(3) The lower the sulfur content in the fuel, the ¥better, the total sulfur content in natural gas and liquefied petroleum gas should b♦e less than 0.1%, the sulfur content in city gas should not exceed 0←.25g/m3 at most, and the sulfur content in fuel oil. Should be less than 0.5%.
(4) The furnace gas must be clean and micro-reducing is appropriate. The fu÷rnace gas should be prevented from fluctuating between oxidizing and reducing prop®erties, and the heating flame cannot be directly burned to the workpiece.
(5), should be heated as fast as possible to the required temperature.
2, Hastelloy B2 (N10665, 2.4617) Hastelloy thermal processing:
(1) The hot working temperature range of Hastelloy B-2 is 1160 &de<g; C ~ 900 ° C, and the cooling method is water quenching.
(2) In order to ensure the best anti-corrosion perform®ance, annealing should be carried out after hot working.
(3) When hot working, the workpiece should be directly added to the hea♦t treatment furnace that has been heated.
3, Hastelloy B2 (N10665, 2.4617) Hastelloy cold processing:
(1) Cold working needs to be carried out in a solution annealed sta§te.
(2), Hastelloy B-2 has a higher work hardening rate tha¶n austenitic stainless steel, so it is necessary to adj✘ust the processing equipment accordingly. There should be intermediate an★nealing during cold working.
(3) If the cold rolling deformation is greater than 15%, thσe workpiece needs to be solution treated before use.
4, Hastelloy B2 (N10665, 2.4617) Hastelloy heat treatment:δ
(1) The solution treatment temperature range of Hastelloy B-2 is 1060 ° C to 10≠80 ° C.
(2) For materials with a thickness greater than 1.5 mm&, it is recommended to use water cooling or rapid air ♣cooling to ensure the best corrosion resistance.
(3) In all heat treatment processes, care should be> taken to observe the above-mentioned items that must be kept clean.
5. Hastelloy B2 (N10665, 2.4617) Hastelloy Deoxidation:
(1) The surface oxide and oxidized color of Hastelloy B-2 and the adhesion of the weld slag arou§nd the weld are stronger than those of stainless steel. It is recommended to use a fine-grain→ed abrasive belt or a fine-grained grinding wheel ↔for grinding.
(2) Before pickling, use sandblasting or careful grinding to break the oxide.
(3), using a HNO3/HF mixed acid for appropriate time and temp•erature pickling. Due to the sensitivity of the alloy to the oxidizing medium, the weight o€f the alloy may be lost and is accompanied by the formation of more δnitrogen-containing gas.
6, Hastelloy B2 (N10665, 2.4617) Hastelloy machining:
Hastelloy B-2 should be machined after annealing. Due to the high work harden±ing rate of the material, it is better to use a lower cutting speed and he™avy feed than the processing of low alloy standard austenitic stainless steel to cut into €cold hardening. Below the surface.
Hastelloy B2 (N10665, 2.4617) Hastelloy Welding:
1. Hastelloy B-2 alloy can be tungsten electrode shi★elded gas welding (GTAW/TIG) or gas shielded arc welding (SMAW/MMA) under certain c ircumstances. The material to be welded shall be annealed to remove oxφide scale, oil stains and various marking marks. The area of the bas'e material on both sides of the weld shall be polished to a brig✘ht metal. Hastelloy B-2 has a lower thermal conductivity than steel. When using a single V-shaped €solder joint, the angle should be 70° with low ±heat input and the interlayer temperature does not exceed 1§20 °C. The oxidized color can be removed when the weld is still hot. In s≥ome applications, post-weld heat treatment is required to eliminate residual≈ stress and improve stress corrosion cracking resistance. For best corrosion resist<ance, argon arc welding, the tungsten electrode inert gas shielded welding GTAW, is re commended.
2, Hastelloy B-2 alloy welding filler metal: commonlδy used filler metal: welding wire: ERNiMo-7, welding rod: ENiMo-7. Only the use∞ of such a welding electrode can avoid the precipitation of carbon or silicon or minimi₽ze the precipitation.
The nickel-molybdenum alloy Hastelloy B-2 has a very low carbon and silicon content, ₩which reduces the precipitation of carbon and other impurity phases in the he©at affected zone of the weld, so the weld seam als™o has sufficient corrosion resistance. Hastelloy B-2 has exce₹llent corrosion resistance in reducing media, such as hydrochloric acid solutions of varioδus temperatures and concentrations. It also has goo≠d corrosion resistance in medium concentration sulfuric acid solution (or contains a cert$ain amount of chloride ions). It can also be used in acetic acid and phosphoric acid environm®ents. Alloy materials have the best corrosion resistance only ¥in the proper metallographic state and pure crystal structure. It is widely used in the fields of chemistry, petrochemical, energy production and pollution control, es♠pecially in industries such as sulfuric acid, hydrochloric acid, phosphoric acid and aceti<c acid.
Hastelloy B2 (N10665, 2.4617) specifications and supply status:
1. Variety classification: Shanghai Baoyu special alloy can produce various specificatio¥ns of Hastelloy B2 seamless pipe, Hastelloy B2 steel λplate, Hastelloy B2 round steel, Hastelloy B2 forging, Hastelloy B2 flange, ∞Hastelloy B2 ring, Hastelloy B2 welded pipe, Hastelloy B2 steel strip, Ha£stelloy B2 wire and matching welding consumables.
2, delivery status: seamless pipe: solid solution + acid white, length can be fixe✘d; sheet: solid solution, pickling, trimming; welded p§ipe: solid solution acid white + RT% flaw detection, forgings: annealing + car light; The bar is in the state of forging, surfa↕ce polishing or car light; the strip is cold-rolled, solid solution soft, and descaled; the wir♦e is solid-dissolved and acid-washed, or straight, solid solut×ion Light state delivery.
Packaging & Shipping
Packaging:Products are generally supplied in standard cardboard boxes, pallets, wo¥oden boxes. Special packaging requirements can also be acco•mmodated. (also depend on the customers' requirementsπ)
Shipping: We cooperation with many logistics company,We can provide express, se≥a transportation, air transportation, and rail way transportation based on customers' requi∑rement.
Our Services
1) We can provide a free sample for testing.
2) Customized lable, packing, OEM service
3) Mill test certificate will be provided after production, If it is neces&sary.
4) Good packing methods to keep goods no damage during delivery
5) We are cooperation with many famous forwarder, will try o ur best to choose the safty, convenience, quick, and chea p mode of transportation for our customers.
© Haosteel Group Co., Limited 京ICP證000000号-2
Website Construction: www.300.cn