PRODUCT CENTER
Incoloy 330 N08830 Nickel Base alloy steel pipe
Incoloy 330 N08830 Nickel Base alloy steel pipe
Haosteel is professional manufacturer and supplier&nbsγp;of Nickel based Incoloy 330 N08830 alloy steel pipe tube. Quality ¶;guaranteed, On-time delivery, After-sales warranty.
Incoloy is a nickel ferrochrome alloy designed for oxidation and carbonation at elevated temperatures.Incoloy alloy has many kinds: common such as Incoloy800, Incoloy800H, Incoloy800HT, Incoloy825, Incoloy840, Incoloy901, Incoloy925, Incoloy20, Incoloy330, Incoloy 25-6mo, etc.The alloy contains a small amount of the metallic elements molybdenum and copper.In re®ductive acid and oxidizing acid, it has good corrosion resistance, <as well as good resistance to stress corrosion cracking, pitting and crevice corrosion.It has excellent corrosion resistance to sulfuric acid and phosphoric acid.The alloy★ has good cold and hot working properties and is easy to be formed and welded.The main products of this alloy are rods, tubes, plates, strips, wires and ≠forgings, etc. It is mainly used in the chemical, petrocβhemical, nuclear and rare metal refining industries.
Incoloy 330 alloy steel pipe tube
N08830 alloy steel pipe tube
Description:
Incoloy 330 (N08330) is a nickel-iron-chromium austenitic alloy designed for oxidation and carbu™rization in high temperature environments. The nickel conten¥t of 34% to 37% gives the material a high resistance to chloride stress corrosion Ωcracking and sigma phase precipitation embrittlement. The material is♠ processed by standard machining procedures for stainless steel and nicke§l alloys. It is widely used in the environment of combination o f cyclic heating and carburizing to resist corrosion. Incoloy 330 stainless steel is an austeniti≠c heat and corrosion resistant alloy with a combination of ∏strength and resistance to carburization, oxidatio•n and thermal shock resistance. This alloy is designed for use in high∏ temperature industrial environments where the combi ned effects of carburization and thermal cycling are nec←essary, such as in the heat treatment industry. Carburizing and oxidation resistance to abou↔t 2100 °F is an increase in the silicon content of the all∞oy.
Complete specifications, stock in stock
Strip, sheet (thick plate, medium plate, sheet, steel plate), bar (black bar, light bφar, grinding bar, round bar, square bar, steel bar), pipe (capillaryφ, seamless pipe, steel pipe), Forgings (flanges, elbows, bolts, nuts, tees), welding consumables (™welding rods, welding wire, welded pipes), wire and other materials.
Chemical Composition Of Incoloy 330
|
C≤ |
Si≤ |
Mn≤ |
P≤ |
S≤ |
Cr≥ |
Ni≥ |
Mo≥ |
Cu≤ |
|
0.08 |
0.75-1.50 |
2.00 |
0.030 |
0.030 |
17.0-20.0 |
34.0-37.0 |
1.0-1.75 |
1.00 |
|
|
Sn≤ |
Pb≤ |
Ti≤ |
Fe≤ |
Co≤ |
V≤ |
W≤ |
Nb≤ |
|
0.025 |
0.005 |
- |
- |
- |
- |
- |
- |
Physical properties of Incoloy 330 (N08830) nickel-baseδd alloy:
1. Incoloy 330 (N08830) nickel base alloy density:
(1) 8.08 g/cm3 (grams per cubic centimeter).
(2) 0.292 lb/in3 (pounds per cubic inch).
2, Incoloy 330 (N08830) nickel-based alloy specific heat:
(1): 0.11 BTU/lb/°F (32 - 212°F) (British heat/pounds/→Fahrenheit).
(2): 460 Joules/kg/°C (0 - 100°C) (Coke/kg/Cel↕sius).
3, Incoloy 330 (N08830) nickel-based alloy magnetic permeability: 1.02 at 70 °F / 20 &×deg; C
Incoloy 330 (N08830) nickel base alloy corrosion resistan§ce:
Incoloy 330 (N08830) has excellent corrosion resistance, especially for oxidation, car∑burizing and nitriding environments. In an aqueous medium environment, the chromiπum component of 330 is resistant to oxidative environment€al corrosion, and the nickel component enhances resistance to reducing §corrosion. The high nickel content of the alloy gives the material a strong resistance to ch≠loride stress corrosion cracking and sigma phase embrittlement.
Incoloy 330 (N08830) nickel-based alloy oxidation resistance:
Incoloy 330 (N08830) has excellent oxidation resistance an∞d excellent anti-fouling ability at temperatures up to 2000°F (1095°C). Any oxide s÷cale will adhere tightly to the surface of the material, especially under alterna←ting thermal and thermal cycling conditions.
Incoloy 330 (N08830) nickel-based alloy carburization resistance:
35% nickel and a certain amount of silicon give the material excellent resistance to carburization. Alloy 330 exhibits excellent resistance to "g reen rot" in alternating environments of carburizatio✔n and oxidation.
Incoloy 330 (N08830) Ni-based alloy heat treatment:
Incoloy 330 (N08830) is an austenitic stainless steel↓ that cannot be hardened by heat treatment. Hardening can only★ be achieved by cold working to reach room temperature strength. For most high temper&ature applications, 330 is not annealed after cold forming or welding. If the material ↓needs to be completely annealed, it should be carried out at a temperature♣ range of 1870-2050 °F (1020-1120 °C). Water quenching of the material gives the best cre>ep resistance, but the same effect can be achieved by rapidly co↕oling to below 800 °F (425 °C).
Incoloy 330 (N08830) nickel base alloy manufacturing:
Incoloy 330 (N08830) alloys can be hot formed or cold formed using standard procedures "for austenitic stainless steels and nickel alloys. The work hardening rate of the alloy can be c™ompared to other austenitic stainless steels. It is recommended to shape the material at room tem¥perature. If the material requires hot working, the material should be uniformly heated to ↓2050-2150 °F (1120-1180 °C) and then lowered to 17501⁄4 °F (950 °C) for thermal insulation. The material should be cooled by water qu×enching.
We recommend annealing after hot working to ensure the best corrosion ↓resistance and optimum grain structure of the material. The mate∏rial cannot be forged or bent in the range of 1200-1600 °F (650-870 °C) because t'he ductility of the material is low in this temperature ran ge, which may cause the intergranular structure of the austenitic alloy material to rupture.
Incoloy 330 (N08830) nickel-based alloy welding:
Incoloy 330 (N08830) can be welded by tungsten arc weldingπ, electrode welding and plasma arc machining, and the best♥ corrosion resistance is obtained by tungsten arc welding. Prior to welding, the ma↓terial should be annealed and kept clean and free of dirt, grease and other im←purities. Grinding should be performed within one inch of both sides of the joint. The temperature ±between the solder layers should not exceed 300 °F (150 °C), and heat t÷reatment is not required before or after soldering. All♣oy 330 can be welded to different types of metals.
Product Details:
|
Product Name |
Good strength Incoloy 330 alloy steel |
|
Material |
Monel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy |
|
Shape |
Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet |
|
Grade |
Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron↔ 100),2304,904L |
|
Others: 253Ma,254SMo,654SMo,F50(UNS S32100)F60,F61,F65,1J22,N4,N6 etc |
|
|
Alloy : Alloy 20/28/31; |
|
|
Hastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g; |
|
|
Hastelloy B / UNS N10001,Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617,Hastλelloy C,Hastelloy C-4 /UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNSε N06022 / DIN W. Nr. 2.4602,Hastelloy C-276 / UNS N10276 / DIN W.ε Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665 |
|
|
Haynes: Haynes 230/556/188; |
|
|
Inconel 600/601/602CA/617/625/713/718/738/X-750,Ca♥rpenter 20; |
|
|
Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06601 / DIN W. <Nr. 2.4851,Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07725,I♣nconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel 600 / UNS N06600 / DIN€ W. Nr. 2.4816 |
|
|
Incoloy: Incoloy 330/800/800H/800HT/825/901/925/926; |
|
|
GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044 |
|
|
Monel: Monel 400/K500/R405 |
|
|
Nitronic: Nitronic 40/50/60; |
|
|
Nimonic: Nimonic 75/80A/90/A263 ; |
|
|
Specification |
Wire: 0.01-10mm |
|
Product |
1.According to the preparation process can be divided ₩into deformation superalloys, |
|
Standard |
GB,AISI,ASTM,DIN,EN,SUS,UNS etc |
|
Inspection |
ISO,SGS,BV and so on. |
|
Packaging |
1. cases packed in wooden cases |
Incoloy 330 (N08830) specifications and availability:
1. Variety classification: Shanghai Haosteel Co., Ltd. can produce seamless pipes, steel plates, round steels, forgings, flanges, rings, welded pipes, stee l strips, wire materials and supporting welding materials of variou<s specifications.
2, delivery status: seamless pipe: solid solution ×+ acid white, length can be fixed; sheet: solid solution, pickling, trimming; welded pip<e: solid solution acid white + RT% flaw detection, forgings: annealing + car light; The bar i∑s in the state of forging, surface polishing or car light; the strip is cold-rolled, solid solution soft, and descaled; the wire is solid-dissolved and acid-washed, or straight, solid solution Light state delivery.
Application areas:
1. Furnace container carburizing, carbonitriding, forgeable annealing
2, muffle furnace, distillation tank
3, pole rack heat treatment basket
4, quenching device
5, radiant tube
6, salt basin
7, furnace fan and shaft
8, conveyor
9, pipe hanger crude oil heater ADN steam boiler
10, heat exchanger
Packaging & Shipping
Packaging:Products are generally supplied in standard cardboard boxes, pallets, ↑wooden boxes. Special packaging requirements can also be accommodated. (also dep↓end on the customers' requirements)
Shipping: We cooperation with many logistics company,We can provide express¶, sea transportation, air transportation, and rail way transportation based on customers' requirement.
Our Services
1) We can provide a free sample for testing.
2) Customized lable, packing, OEM service
3) Mill test certificate will be provided after production, If it is necessar≥y.
4) Good packing methods to keep goods no damage during delivery
5) We are cooperation with many famous forwarder, w ill try our best to choose the safty, convenience, quick, and cheap mode of transportation Ωfor our customers. 
© Haosteel Group Co., Limited 京ICP證000000号-2
Website Construction: www.300.cn