PRODUCT CENTER
301 Stainless Steel Spring Wire
301 Stainless Steel Spring Wire
Haosteel is professional manufacturer and supplierδ of 301 Stainless Steel Spring Wire. Quality guaranteed, On-time delivery, After-sales wβarranty.
|
Standard: |
ASTM A580/A313 |
|
Grade: |
301/SUS301/S30100/1.4319 |
|
Delivery: |
Cold drawn Hot rolled |
|
Surface: |
bright, cloudy,plain,black bright, matt |
|
diameter: |
0.02-25mm |
|
Type |
spring,welded,tig,mig etc soft and hard |
|
Length: |
as your requirement |
|
Raw material: |
Tisco, Jisco, Baosteel, etc. |
|
Delivery time: |
15 days in common |
301 Stainless Steel Spring Wire,SUS301 Stainless Steel Spring Wire,S30100 Stainless Steel Spring ✔Wire,1.4319 Stainless Steel Spring Wire
Description:
301 is an austenitic stainless steel capable of attaining high strengths and ductility by cold working. It is not hardenable by heat treatment. Type 30≤1 is non-magnetic in the annealed condition and becomes incre↕asingly magnetic with cold working. It is preferable over types 302 and 304 in the Ωtempered condition because the higher enlongations (which ☆are attainable at a given strength level) facilitate fabri♠cation.
Chemical composition:
|
C |
Si |
Mn |
P |
S |
Cr |
Ni |
N |
|
≤ 0.15 |
≤ 1.00 |
≤ 2.00 |
≤ 0.045 |
≤ 0.03 |
16.00 - 18.00 |
6.00 - 8.00 |
≤ 0.10 |
Physical Properties:
Properties: Annealed
Ultimate Tensile Strength: 75 KSI min (515 MPA min)
Yield Strength (0.2% offset): 30 KSI min (205 MPA min)
Elongation: 40% Min
Hardness: B92 or Equiv. Max
Properties: Tempered
1/16 Hard
Ultimate Tensile Strength: 90 KSI min (629 MPA min)
Yield Strength: (0.2% Offset) 45 KSI min (310 MPA min)
Elongation: 40% Min
1/8 Hard
Ultimate Tensile Strength: 100 KSI MIN (690 MPA)
Yield Strength: (0.2% Offset) 55 KSI MIN/380 MPA MIN
Elongation: 40% Min
1/4 Hard
Ultimate Tensile Strength: 125 KSI MIN (860 MPA)
Yield Strength: (0.2% Offset) 75 KSI MIN/515 MPA MIN
Elongation: 25% Min
1/2 Hard
Ultimate Tensile Strength: 150 KSI min (1035 MPA m®in)
Yield Strength: (0.2% Offset) 110 KSI min (760 MPA min)
Elongation: 15%<.015″, 18%>.015″
3/4 Hard
Ultimate Tensile Strength: 175 KSI min (1205 MPA min)
Yield Strength: (0.2% Offset) 75 KSI MIN/515 MPA MIN
Elongation: 10%< .015″, 12%> .015″
Full Hard
Ultimate Tensile Strength: 185 KSI min (1275 MPA min)
Yield Strength: (0.2% Offset) 140 KSI min (965 MPA min)
Elongation: 8% < .015″, 9% > .015″
Extra Full Hard
Ultimate Tensile Strength:
270 KSI min < .014″ (1860 MPA min)
250 KSI min .015″ to 017″ (1720 MPA min)
225 KSI min .0171″ to .019″ (1552 MPA min)
205 KSI min .0191 to .021 (1435 MPA min)
185 KSI min >.0211 (1275 MPA min)
Spring Tempered
Ultimate Tensile Strength: 185 KSI min (1275 MPA min)
Yield Strength: (0.2% Offset) 140 KSI min (965 MPA min)
Elongation: 8% < .015″, 9% > .045″
Product inventory display
© Haosteel Group Co., Limited 京ICP證000000号-2
Website Construction: www.300.cn