PRODUCT CENTER
Hastelloy B N10001 Nickel alloy steel bar
Hastelloy B N10001 Nickel alloy steel bar forging
Haosteel is professional manufacturer and supplier of Hastelloy B N10001 Nickel alloy steel bar forging↕. Quality guaranteed, On-time delivery, After-sales&n bsp;warranty.
Hastelloy B alloy steel bar forging
N10001 Nickel alloy steel bar forging
Description:
Hastelloy is a nickel-based corrosion-resistant alloy, which is mainly divided into nickel-chromiu®m alloy and nickel-chromium-molybdenum alloy. Hastelloy has good corrosion resis₹tance and thermal stability, and is used in aviation 'and chemical fields. Hastelloy is the general name for the commercial gra≠des of nickel-based corrosion-resistant alloys produced by Hastelloy International.
Hastelloy B Hastelloy Overview: Hastelloy B alloy is a nic kel-molybdenum corrosion-resistant alloy, its main feature is resistance to boiling HCl corrosion , the alloy has good corrosion resistance under atmospheric conditions. Nickel-molybdenum alloy has₹ very low carbon and silicon content. It reduces the precipitation of carbon and other impurity €phases in the heat affected zone of the weld, so the weld seam also has sufficient corrosion εresistance. It has good corrosion resistance in reducing media, s uch as HCl solutions of various temperatures and concentrations. It also has¶ good corrosion resistance in medium concentrations of H2SO4 sol™ution (or containing chloride ions). It can also be usβed in CH3COOH and H3PO4 environments. Alloy materials have good corrosion βresistance only in the proper metallographic state and pure crystal structure. Hastelloy B Hastelloy is a nickel-based superalloy consisting of nickel, molyγbdenum, cobalt and other elements with a nickel content of approximately 62%. Hastelloy B Hastλelloy has a wide range of applications in the chemical, petrochemical, energy manufacturing and p↔ollution control industries, especially in the sulfuric acid, hydrochloric acid, phospho÷ric acid, acetic acid and other industries.
Hastelloy is a nickel-based corrosion-resistant alloy, whi✔ch is mainly divided into nickel-chromium alloy and nickel-chromium-molybdenum alloy. Hastelloy has good corrosion resistance and thermal stability,♣ and is used in aviation and chemical fields. Hastelloy is the general name for the commercial grαades of nickel-based corrosion-resistant alloys produced b$y Hastelloy International.
Corrosion resistance of Hastelloy B Hastelloy:
Hastelloy B Hastelloy has a very low carbon and silicon con€tent, which reduces the precipitation of carbon and other impurity phases ±in the heat affected zone of the weld. Therefore, the weld is also sufficiently corrosion resista€nt. Hastelloy B-2 alloy has excellent corrosion resistance in ♥reducing media, such as hydrochloric acid solutions of various tempe♥ratures and concentrations. It also has good corrosion resistance in medium concentratio≠n sulfuric acid solution (or contains a certain amount of chloride ions). It can also be used₩ in acetic acid and phosphoric acid environments. Alloy mate¥rials have the best corrosion resistance only in the proper ±metallographic state and pure crystal structure.
Hastelloy B Hastelloy grades and standards:
Material grade: Hastelloy B Hastelloy US UNS brand: N10001
Complete specifications, stock in stock
Strip, sheet (thick plate, medium plate, sheet, steel pl¥ate), bar (black bar, light bar, grinding bar, round bar, square bar, steel bar), pipe (c✔apillary, seamless pipe, steel pipe), Forgings (fla¶nges, elbows, bolts, nuts, tees), welding consumables (we<lding rods, welding wire, welded pipes), wire and other materials₽.
Chemical Composition Of Hastelloy B
|
Alloy |
% |
Ni |
Mo |
Fe |
Cr |
Co |
C |
Mn |
V |
Si |
P |
S |
|
Hastelloy B |
Min |
Re |
26 |
4.0 |
|
|
|
|
0.2 |
|
|
|
|
|
Max |
|
30 |
6.0 |
1.0 |
2.5 |
0.05 |
1.0 |
0.4 |
1.0 |
0.04 |
0.03 |
Hastelloy B Hastelloy physical properties: density: 9.24g/cm3, melting point: 1330-1380 °✘C.
Hastelloy B Hastelloy Mechanical Properties:
1. Hastelloy B Hastelloy tensile strength Rm N/mm2 ≥ 690.
2. Hastelloy B Hastelloy yield strength: RP0.2N/mm2 ≥ 310.
3. Hastelloy B Hastelloy elongation: A5 % ≥ 40.
Hastelloy B Hastelloy has the following properties:
1. Control iron and chromium at the lowest level to prevent the format∑ion of β-phase Ni4Mo.
2. Excellent corrosion resistance to the reducing environment.
3, excellent resistance to moderate concentrations of sulfuric acid ÷and many non-oxidizing acids.
4, very good resistance to chloride ion reduction stress corrosion cracking (SCC).
5, excellent resistance to a variety of organic acid corrosion.
Metallographic structure of Hastelloy B Hastelloy:
Hastelloy B Hastelloy is a face-centered cubic latti×ce structure. By controlling the iron and chromium content to a minimum, processing and brittleness are reduced, preventing precipitation of Ni4Mo phase betweenε 700 and 870 °C.
Corrosion resistance of Hastelloy B Hastelloy:
Hastelloy B Hastelloy has a very low carbon and silico♣n content, which reduces the precipitation of carbon and other impurity phases in ↓the heat affected zone of the weld. Therefore, the weld is also s¶ufficiently corrosion resistant. Hastelloy B-2 alloy has excellent corrosion resi§stance in reducing media, such as hydrochloric acid solutions of various temperatures and concent rations. It also has good corrosion resistance in medium concentration sulfuric acid solution ©(or contains a certain amount of chloride ions). It can also be used in acetic a©cid and phosphoric acid environments. Alloy materials have the best corrosion resistance only in the proper metallographic state and pure crystal structure.
Product Details:
|
Product Name |
Good strength Hastelloy B N10001 alloy steel |
|
Material |
Monel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel All≥oy |
|
Shape |
Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Squ¶are,Bar,Pipe,Sheet |
|
Grade |
Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L |
|
Others: 253Ma,254SMo,654SMo,F50(UNS S32100)F60,F61,F65®,1J22,N4,N6 etc |
|
|
Alloy : Alloy 20/28/31;Nickel 200，Nickel 201 |
|
|
Hastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30 /X/N/g; |
|
|
Hastelloy B / UNS N10001,Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617,Hastelloy C₹,Hastelloy C-4 /UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602,Hast₩elloy C-276 / UNS N10276 / DIN W. Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr$. 2.4665 |
|
|
Haynes: Haynes 230/556/188; |
|
|
Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20; |
|
|
Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N0660÷1 / DIN W. Nr. 2.4851,Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07♦725,Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel ↓600 / UNS N06600 / DIN W. Nr. 2.4816 |
|
|
Incoloy: Incoloy 330/800/800H/800HT/825/901/925/926; |
|
|
GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044 |
|
|
Monel: Monel 400/K500/R405 |
|
|
Nitronic: Nitronic 40/50/60; |
|
|
Nimonic: Nimonic 75/80/80A/90/93/A263 ; |
|
|
Specification |
Wire: 0.01-10mm |
|
Product |
1.According to the preparation process can be divided into deformati♠on superalloys, |
|
Standard |
GB,AISI,ASTM,DIN,EN,SUS,UNS etc |
|
Inspection |
ISO,SGS,BV and so on. |
|
Packaging |
1. cases packed in wooden cases |
Hastelloy B2 (N10665, 2.4617) Hastelloy application range:
Hastelloy B-2 has a wide range of applications in the chemical, petrochemi★cal, energy manufacturing and pollution control industries, especially in the sulfuric acδid, hydrochloric acid, phosphoric acid, acetic acid and other industries. If it§ is used in a special field, please consult the material supplier.
Hastelloy B2 (N10665, 2.4617) Hastelloy processing and heatλ treatment:
1. Hastelloy B2 (N10665, 2.4617) Hastelloy heating:
(1) It is very important to keep the workpiece clea±n and free of contamination before and during heat treatment.
(2), can not contact sulfur, phosphorus, lead and other low melting point metals during heating, ot♠herwise it will damage the performance of the alloy and make Hastelloy B-2 brittle.← Care should be taken to remove stains such as marking paints, temperature indicating paintβs, colored crayons, chalk, lubricating oils, various liquids and oils, fuels, etc.
(3) The lower the sulfur content in the fuel, the better, the total sulfur co₩ntent in natural gas and liquefied petroleum gas should be less "than 0.1%, the sulfur content in city gas should n☆ot exceed 0.25g/m3 at most, and the sulfur content in fuel oil. Should be less than 0δ.5%.
(4) The furnace gas must be clean and micro-reducing is appropriate. The fur•nace gas should be prevented from fluctuating between oxidizing and redu∑cing properties, and the heating flame cannot be directly burned ✔to the workpiece.
(5), should be heated as fast as possible to the required temperature.
2, Hastelloy B2 (N10665, 2.4617) Hastelloy thermal processing:
(1) The hot working temperature range of Hastelloy B-2 is 1160 ° C ~ 900 ° C, and the cooling method is water quenching.
(2) In order to ensure the best anti-corrosion performance, annealing s♠hould be carried out after hot working.
(3) When hot working, the workpiece should be directly added to the heat treatment furnace£ that has been heated.
3, Hastelloy B2 (N10665, 2.4617) Hastelloy cold processing:
(1) Cold working needs to be carried out in a solution annealed state.
(2), Hastelloy B-2 has a higher work hardening rate than austΩenitic stainless steel, so it is necessary to adjust the pro cessing equipment accordingly. There should be intermediate annealin♠g during cold working.
(3) If the cold rolling deformation is greater than 15%, the workpiece needαs to be solution treated before use.
4, Hastelloy B2 (N10665, 2.4617) Hastelloy heat treatment:
(1) The solution treatment temperature range of Hastelloy B-2 i±s 1060 ° C to 1080 ° C.
(2) For materials with a thickness greater than 1.5 mm, it is recommend₹ed to use water cooling or rapid air cooling to ensure the best corrosion resisΩtance.
(3) In all heat treatment processes, care should be take↕n to observe the above-mentioned items that must be kept clean.
5. Hastelloy B2 (N10665, 2.4617) Hastelloy Deoxidation:
(1) The surface oxide and oxidized color of Hastelloy B-2 and the adhe×sion of the weld slag around the weld are stronger than those of stainless steel. It§ is recommended to use a fine-grained abrasive belt or a fine-grained gr"inding wheel for grinding.
(2) Before pickling, use sandblasting or careful grinding to break the oxide.
(3), using a HNO3/HF mixed acid for appropriate time and temperature pickling. Due< to the sensitivity of the alloy to the oxidizing me₩dium, the weight of the alloy may be lost and is accompanied by the formation of mo♥re nitrogen-containing gas.
6, Hastelloy B2 (N10665, 2.4617) Hastelloy machining:
Hastelloy B-2 should be machined after annealing. Due to the high wo¥rk hardening rate of the material, it is better to use a lower cutting speed and heavy f"eed than the processing of low alloy standard austenitic stainless steel to cut into cold har dening. Below the surface.
Hastelloy B2 (N10665, 2.4617) Hastelloy Welding:
1. Hastelloy B-2 alloy can be tungsten electrode shielded gas ≤welding (GTAW/TIG) or gas shielded arc welding (SMAW/MMA) under certain circumstances. The material to be welded shall be annealed to remove oxide scale, oil stains a★nd various marking marks. The area of the base material on both sides of the w>eld shall be polished to a bright metal. Hastelloy B-2 has a loweβr thermal conductivity than steel. When using a single V-shaped solder joint, the angle shδould be 70° with low heat input and the interlayer temperature does not exceed 1π20 °C. The oxidized color can be removed when the± weld is still hot. In some applications, post-weld heat treatment is re♣quired to eliminate residual stress and improve stress corrosion cracking resi stance. For best corrosion resistance, argon arc welding, the tungsteλn electrode inert gas shielded welding GTAW, is recommended.
2, Hastelloy B-2 alloy welding filler metal: commonly used filler meta€l: welding wire: ERNiMo-7, welding rod: ENiMo-7. Only the use of such a welding el♦ectrode can avoid the precipitation of carbon or silicon or minimize the precipitation.
The nickel-molybdenum alloy Hastelloy B-2 has a very low carbon and silicon content, which reducφes the precipitation of carbon and other impurity phases in the heat affected zone of the weld, so the weld seam also has sufficient πcorrosion resistance. Hastelloy B-2 has excellent corrosion resistance in reducing media, such♠ as hydrochloric acid solutions of various temperatures and c&oncentrations. It also has good corrosion resistance in γmedium concentration sulfuric acid solution (or contains a certain amoun&t of chloride ions). It can also be used in acetic ac♠id and phosphoric acid environments. Alloy materials have ≈the best corrosion resistance only in the proper metallographic state and p∑ure crystal structure. It is widely used in the fields of chemi€stry, petrochemical, energy production and pollution control, especially in indu☆stries such as sulfuric acid, hydrochloric acid, phosphoric acid and acetic acid.λ
Hastelloy B2 (N10665, 2.4617) specifications and supply status:
1. Variety classification: Shanghai Baoyu special alloy can produce varioγus specifications of Hastelloy B2 seamless pipe, Hastelloy B2 steel pl★ate, Hastelloy B2 round steel, Hastelloy B2 forging, Hastelloy B2 flange, Hastelloy B2 ring,☆ Hastelloy B2 welded pipe, Hastelloy B2 steel strip, Hastelloy B2 wire and matching weldi®ng consumables.
2, delivery status: seamless pipe: solid solution + acid white, length ca←n be fixed; sheet: solid solution, pickling, trimming; welded pipe✘: solid solution acid white + RT% flaw detection, forgings: annealing + car light; The bar is i§n the state of forging, surface polishing or car light; the ×strip is cold-rolled, solid solution soft, and descaled; the wire is solid-dissolved and acφid-washed, or straight, solid solution Light state delivery.
Packaging & Shipping
Packaging:Products are generally supplied in standard cardboard boxes, pallets, woodeσn boxes. Special packaging requirements can also be accommodatσed. (also depend on the customers' requirements)
Shipping: We cooperation with many logistics company,We can provide exp≤ress, sea transportation, air transportation, and rail way transportation based on customers' requirement.
Our Services
1) We can provide a free sample for testing.
2) Customized lable, packing, OEM service
3) Mill test certificate will be provided after production,π If it is necessary.
4) Good packing methods to keep goods no damage during deliveryσ
5) We are cooperation with many famous forwarder, will try our best to choose the s✘afty, convenience, quick, and cheap mode of transportation for our customers.&nb≠sp;
© Haosteel Group Co., Limited 京ICP證000000号-2
Website Construction: www.300.cn